Complete Electrical
Engineering Solutions

Motor Repair & Rewinding

AC/DC motors, servo motors, stepper motors, and generators. Full disassembly, rewinding, balancing, and performance testing.

• → Single & three-phase motors
• → High voltage motors (up to 11kV)
• → Variable speed drive integration

Typical turnaround: 3-5 working days

Transformer Services

Diagnosis, repair, and replacement of power transformers, isolation transformers, and control transformers.

• → Oil analysis & dielectric testing
• → Winding resistance measurement
• → Thermal imaging surveys

24/7 emergency callout available

Control Panel Repair

PLC systems, motor control centers, distribution boards, and custom control panels. Circuit tracing and component-level repair.

• → Siemens, Allen-Bradley, Schneider
• → HMI touchscreen replacement
• → Relay logic troubleshooting

On-site or workshop service

Circuit Breaker Testing

MCCB, ACB, and RCD testing, repair, and replacement. Ensuring protection devices operate within specification.

• → Trip time measurement
• → Contact resistance testing
• → Arc chamber inspection

Cable Fault Location

Underground cable fault finding using TDR and bridge methods. Precision location minimizes excavation and downtime.

• → High voltage cable testing
• → Partial discharge detection
• → Cable jointing & termination

Power Supply Repair

UPS systems, battery banks, DC power supplies, and rectifier units. Keep your backup power systems reliable.

• → Battery load testing
• → Inverter diagnostics
• → Transfer switch testing

Switchgear Maintenance

HV/LV switchgear servicing, vacuum circuit breaker maintenance, and SF6 gas-insulated equipment inspection and testing.

• → Contact resistance testing
• → SF6 gas monitoring
• → Protection relay calibration

Planned outage or live working

Emergency Generator Services

Diesel and gas generator maintenance, load bank testing, automatic transfer switch verification, and fuel system servicing.

• → Load bank testing
• → Automatic start testing
• → Fuel quality analysis

Scheduled maintenance contracts

Planned Preventive Maintenance (PPM)

Regular inspection, testing, and servicing schedules to prevent unexpected failures and maintain optimal performance.

What's Included:

• Visual inspection of all equipment
• Electrical testing (insulation, earth, polarity)
• Thermal imaging surveys
• Connection torque verification
• Lubrication of moving parts
• Detailed reporting with recommendations

Frequency: Monthly, Quarterly, or Annual

Condition-Based Monitoring

Data-driven maintenance using continuous or periodic monitoring of equipment health indicators.

Monitoring Technologies:

• Vibration analysis (motors & bearings)
• Infrared thermography
• Oil analysis (transformers)
• Partial discharge testing
• Power quality monitoring
• Load profiling & energy analysis

Predictive analytics reduce downtime by 40%

Switchgear Maintenance

Cleaning, inspection, and testing of HV/LV switchgear including vacuum circuit breakers and SF6 equipment.

Emergency Lighting Testing

Monthly function tests and annual 3-hour duration tests to comply with BS 5266 fire safety regulations.

Fire Alarm Integration

Electrical interface testing between fire alarm systems and building management systems.

Electrical Installation Condition Reports (EICR)

Comprehensive inspection and testing of fixed electrical installations to BS 7671 standards. Required for insurance, property transactions, and legal compliance.

Our detailed reports identify observed damage, deterioration, defects, dangerous conditions, and non-compliances with classification codes C1, C2, C3, and FI.

Certificate valid for 5 years (commercial) / 10 years (domestic)

Portable Appliance Testing (PAT)

Testing of portable electrical appliances to ensure they are safe for use. Essential for workplace safety compliance and employer liability.

Visual inspection, earth continuity, insulation resistance, and functional checks. Each item receives a unique identification label and certificate.

Testing frequency: Class I (annually) / Class II (every 2 years)

Equipment Calibration

UKAS-traceable calibration of multimeters, clamp meters, insulation testers, and oscilloscopes.

Certificate of Calibration provided

Earth Loop Impedance

Verification of earth fault loop impedance to ensure protective devices will operate within safe disconnection times.

Complies with BS 7671 Regulation 411.4.5

RCD Testing

Trip time and sensitivity testing of residual current devices to confirm protection against electric shock.

30mA trip time must be ≤40ms

Energy Audits

Comprehensive power quality analysis, load profiling, and energy consumption studies. Identify savings opportunities and optimize efficiency.

LED Retrofit

Upgrade legacy lighting to energy-efficient LED systems. Reduce energy costs by up to 70% while improving light quality and lifespan.

Power Factor Correction

Installation of capacitor banks and active PFC systems to reduce reactive power penalties and improve supply quality.

EV Charging Installation

Design and installation of electric vehicle charging infrastructure for commercial and industrial premises.

Solar PV Integration

Electrical integration of photovoltaic systems including inverters, isolators, and grid connection compliance.

Harmonic Analysis

Detection and mitigation of harmonic distortion caused by non-linear loads using filters and active harmonic conditioners.

Thermal Imaging Surveys

Infrared thermography inspections to detect hotspots, loose connections, overloaded circuits, and potential failures before they cause downtime.

Voltage Optimization

Installation of voltage regulation systems to stabilize supply voltage, reduce energy consumption, and extend equipment lifespan by 15-20%.